NICL1K Nickel Chloride Crystals 1 Kg

Nickel Chloride Crystals 1 Kg

PART NUMBER NICL1K

Nickel Chloride can be used to make a strike coat for plating on stainless steel, 

The make up is as follows.

Nickel Chloride: 240 gm/litre;

Hydrochloric Acid:  100 gm/litre;

Heat to 50 deg C.

Plate at the rate of 1 amp per 100 square cms.

If you use all of the bag of Nickel chloride, 1 kg, you will need 4.16 litres of water and 416 gm of hydrochloric acid.

This finish on other metals will give a flat grey nickel finish. There is no brightener.

If you require a bright nickel finish go to the following link.

Nickel Plating Kits

The SDS for this product can be found by scolling down the page.