Daytime White/Nighttime White
Description
This glow-in-the-dark night sight paint is a durable phosphorescent coating which glows brighter and longer than any night sight available.
Daytime Clear/Nighttime Green requires White DuraGlo™ Basecoat.
All other DuraGlo™ does NOT require base coat.
Approximate Glow Time:
Daytime Clear/Nighttime Green - 12 hours
Daytime White/Nighttime White - 2 hours
Daytime Yellow/Nighttime Green - 2 hours
Daytime Pink/Nighttime Orange - 2 hours
DuraGlo Night Sight Paint Instructions
1. Degrease the area to be coated with TruStrip Cleaner/Degreaser.
2. Remove any coating already on the sight with sandpaper.
3. If using DuraGlo Base Coat, mix 12 parts DuraGlo Base Coat with 1 part Hardener. Using an airbrush or a small artists brush, apply the Base Coat. Allow this to dry about an hour.
4. Use an airbrush or small artists brush to apply the DuraGlo.
The DuraGlo Night Sight Paint does not require Hardener!
5. Allow to dry a few hours before using.
6. Activate the DuraGlo by placing in direct light for at least 20 minutes.
7. Take the sight in a dark room or closet and see the results! It’s that easy!
Always wear protective gloves, eyewear, and an approved respirator. Be in a well-ventilated area. Read all warnings and first aid information, and read and follow all instructions when using any DuraCoat® products.
