DuraBlue 4 oz Liquid with Hardener -
MATTE BLUE BLACK
DuraCoat can be applied with any quality airbrush, HVLP gub, Preval Aerosol sprayer or Aerovoe Spra-Tool
Airbrush tip size should be between 0.5mm and 1.0mm
Ideal for use on all parts of a firearm, including ferrous metals, alloys, synthetics and wood.
Resistant to lubricants, cutting oils, and bore solvents.
Excellent physical and chemical performance.
Excellent corrosion and chemical resistance.
Excellent impact, mark, and abrasion resistance.
Excellent hardness and adhesion.
A 4oz bottle finishes 2-4 firearms.
INSTRUCTIONS USING A PREVAL SPRAYER
1. Prep your metal, plastic or wood parts by psraying the TruStripTM Cleaner/Degreaser causing the oil and grimeto run off.
Then scuff with the enclosed pad
2. shake the Duracoat bottle for three minutes then pour into the glass jar. Add the enclosed DurCoat Hardener. screw the white cap onto the jar and shake for one minute. Remove the cap and screw on the Preval sprayer.
3. Spray your parts in thin even passes. allow the part to dry for five minutes in between coats. Apply approximately three coats.
4. Hang your parts to dry. Allow to dry overnight before reassembly. Only expose the parts to light use during the 3 - 4 week cure time.
Once fully cured, your parts will not scratch or chipand will be resistant to all solvents and cleaners.
Depending on the weather, ie temperature and humidity it might take a longer to cure.
