DECORATIVE CHROME PLATING KIT 11.4 LITRES
PART NUMBER: DCPK2
Price: $545.00
HAZMAT Item:
This Item is a HAZMAT item.
We cannot ship this overseas or to some very remote locations in Australia.
We cannot ship this item to a PO Box or parcel locker it must be delivered to a residential or business address.
Because it is a Hazardous item, couriers cannot guarantee delivery times as they have to manage compatibility of all materials they carry. This does not generally affect the delivery of aerosols.
Details
DECORATIVE CHROME PLATING KIT 11.4 LITRES
PART NUMBER: DCPK2
As of 1 October 2019 this kit does not include heaters.
Mix with 11.4 LITRES distilled water and two 6 fl oz [180mL] bottle of Chrome Plating Catalyst.
NB This kit is usually sold in conjunction with nickel and copper plating kit as part of the TRIPLE CHROME PLATING KIT.
However, it can be purchased separately and it is advised to be used to plate over a nickel undercoat if you want to achieve a showroom finish.
There are two type of Chrome Plating:
1. Decorative Chromium Plating
2. Hard Chrome Plating
The application for each procedure is different.
Decorative chrome is usually applied in a very thin layer, over a nickel plate, taking only 2-4 minutes to plate, and Hard chrome is applied straight to the base metal at the rate of 18 to 30 microns per hour of plating.
Different concentrations of chromic acid are required, so you will need to make separate baths for each system.
Decorative Chrome KIT CONTENTS
1 X 15 Litre Bucket
2 x Chrome Crystals
2 x Chrome Catalyst
2 x Lead anodes 200 mm x 200 mm
1 x Mist control balls.
1 x Caswell Plating Manual
YOU MUST SUPPLY
Power Supply Click on"Power Supply" to take you to our Power Supplies.
Heater
Copper Pipe for tank bar
Copper Wire to hang items
Small amount of electrical wire to make connections
Distilled water
Decorative Chromium Plating can be likened to a 'clear coat' on a paint job. It is a very thin layer of a bluish hue metal, which is applied over a nickel plate, the nickel plate being 'the paint job'. Chromium has very poor corrosion resistance as, if applied on its own, it is very porous. It has a cracked, porous appearance when examined under a microscope. Nickel, on the other hand, is very corrosion resistant, but it tends to slowly lose its shine unless polished occasionally. By applying chrome over nickel, we obtain the best of both worlds, high corrosion resistance and longevity of shine. To distinguish nickel from chrome you should look for the yellowish/gold hue of nickel and the bluish tint of chrome.
Decorative Chromium is applied in an extremely thin layer over nickel, approximately 1/100th the thickness of a hair, or 0.000001". This procedure takes only 2-4 minutes, unlike most other plating techniques, but there are several real differences in the application, such as the high current and accurate temperature requirement.
Operating The Decorative Chrome System
|
TANK TYPE
|
Plating
|
|
SOLUTION TEMP RANGE (Deg C)
|
40 - 45
|
|
AIR AGITATION
|
NO
|
|
PLATING TIME (Minutes)
|
1-3
|
|
ANODE
|
200 X 200 mm Lead Plate
|
|
ANODE BANDAGE
|
NO
|
|
VOLTS ON VOLTMETER
|
3-5
|
|
AMPS REQUIRED PER 10 SQ CMS
|
1.2 – 2.5
|
|
FUME HOOD
|
YES
|
|
USE AS STRIKE COAT
|
NO
|
