Here is a great way to paint small parts. The process is simple, requiring only an old electric oven to bake the finish on.
Here’s how it works!

Firstly, the surface of the part is suitably prepared, just as you would for any other paint job.

The special gun is attached to an air compressor, and a power unit.
The air blows the powder from the gun, and the power unit gives the powder a positive charge.

At the same time, the power unit is connected to the piece being coated, and so it has a negative charge. As the positive paint particles fly through the air, they are attracted to the part and lay in an even layer over the entire area of the part. (This works a little like dust on a TV screen.)

The part is then placed in a dedicated electric oven, and baked for a while. This cures the coating to a tough chemical resistant finish.

It is important not to use a gas oven, as the emissions from the coating are flammable.

A moisture filter for the compressor must be changed regularly to ensure best operation.

Why are our powder guns better than our competitors?

• Our powders cups are tapered to provide smoother flow.
• The charge switch is now controlled by the trigger switch on the hand unit.
• The power pack is more compact and lighter.
• Sturdier construction - less powder leaks
• Works with any manufacturers virgin powder coating. Do not use reclaimed powder.